Jump to content

enginear joe

Member
  • Content Count

    2,153
  • Joined

  • Last visited

  • Days Won

    2
Everything posted by enginear joe
 
 
  1. Several years back Dennis S. gave tips on building an outdoor RR. I remember him saying how important a good roadbed foundation was.
  2. Looks like some type of track underlayment cut on bevels under the track?
  3. He said it's 400 concrete blocks connected with concrete and steel bar. He has 4 25 amp boosters and DCC powering the track.
  4. WOW! they look great from here. Nice work.
  5. Ray, what other roads of the SD70ACe shipped? They look great!
  6. I should have updated this post. The motors inside these K-line trucks are not weak. I had an issue long ago and forgot all about it. I did have to swap out all the gears which had cracked. These trucks are still running well with NWSL gears. I had a set of NWSL 2 axle trucks on a scratch build of mine. One worm kept slipping off and wrecking the pulling power of the engine. I finally replaced those trucks with a set of MTH ones.
  7. I'm putting decals on my build and noticed there's no front cab door! I tried to rush things along. See what I missed? Roses for the table? I forgot the whole table!
  8. I wonder, if I use DCS, could I feed two sensors to the electronics in the MTH sound card? or I was speaking of the Dallee electronics with two pickups I am confused? Doesn't take much !
  9. Steady, ..... Steady! As far as I know of, one MTH PS board can only take one input (tach). There are/were several special releases so that might not be true? Ray would know I bet.
  10. I saw an announcement that there's some Dash 9s getting re-released. Anybody have any more info?
  11. I got the decals from Circus City decals. They were thicker than what I got in the past from others. That made them much easier to work with!
  12. I did finally acquire decals for an older build
  13. Wow those cars look great! I love the finish too. Great work here. I follow as much as I can. I have made small molds with varying success. It's an investment I think to make molds as big as you are making. I'm always tight on cash. So I have to find ways to make stuff cheap. The molds that you make, probably pay for them self fast when creating multiple cars or engines. I have so much stuff, that I don't have room for more. I wished we had moved into a bigger property. I am blessed with what I already have. So I just dabble in smaller ways now. I had dreams of several different long trains built like an Army train for example.
  14. Well, definitely test it again after sitting. The problem is a classic one that the DC motor probably smoked itself and the damage won't go away now. Just like the real thing, a AC motor can be stalled without damage. A DC motor fries itself if worked too hard. Heat is a major enemy too. What exact motor did you use? The stock MTH Hudson motor?
  15. Beautiful work Sir! I always follow your builds. Just sometimes lurking in the shadows.
  16. I contacted Ray, who I purchased it from. There was no better part available or anything else he could do. I moved forward. It works better now than before. So what did I break? The whistle smoke tube was partially blocked. It smokes better out of the fill hole than the actual whistle. looks like you win! You're a real winner!
  17. The reason I even looked at the smoke tube is because it was partially blocked. Not because I was bored or wished to take my brand new BB apart for kicks. If I feel that a reply is out of order, I do not make the reply. There are many times I've held back from your posts. I can only suggest you relook at the situation. When I pay 1500 for an engine, I expect it to be right. I have learned to deal with all types of problems and people.
  18. Patience? Who's got patience? I wanna run trains! (hopefully the stripes will cover some?)
  19. Here's a post about the Lionel Vision line Niagara. Half way down the page are more videos from the OP of the engine running on the track with the smoking whistle. Notice how much air (smoke) moves when the whistle blows. https://ogrforum.ogaugerr.com/topic/a-look-inside-the-new-vl-niagara?page=1 I hope there's a way to tune the whistle smoke on the MTH BB. It comes out of the fill hole when left open so much stronger than out of the actual whistle (hole). I may try to make my own tube to connect the smoke unit to the whistle.
 

G Scale Train Forum.com - Copyright 2019 Powered by Invision Community

×
  • Create New...