I have MTH G Scale GG1 I am trying to run it with USA passenger cars...the couplers simply dont like each other ( constant un coupling) Any suggestion for a couple to mount on the passenger car to better mate with the GG1
i have bridge wreck sr 15, the amperage lights do not show anything, i set the breaker..no luck.i reached out to bridgewreks..no response any idea who can repair it.
I am trying to wire an LGB 3 way switch...I cannot get it to switch in tandem. The left works fine ,the right won't fire to the right . Any help would be welcomed.
New house = new layout. This old back wants to come off the ground. Building a large box ( 10 X 30) and backfill is not an option. Thinking about a table about 3 feet high with cross beams spaced apart but below the top of the table by 4 in inches and and then screened off and back filled. Any one have experience with anything loke this
I want to start my grandson on his first garden set.....i think the remote commander is the way to go....However i don't know if its compatible with a 2 rail system.....any help is appreciated
I want to start my grandson on his first garden set.....i think the remote commander is the way to go....However i don't know if its compatible with a 2 rail system.....any help is appreciated
I have an MTH GG1 and USA Trains streamlined passenger cars. The GG1 coupler has a long shank and is higher than the passenger coupler which also has a long shank..I have been to the Kadee web site and all the shanks seem too short. any ideas would be welcome
I am looking at the bridgeworks 10 or 15 amp power supply. I read the tiu is rated at 10 amps. if that is the case would the 15 amp fry the TIU? I run 300 ft single track with meh gg1, v1000, f3 and two lighted passenger cars > any suggestion would be appreiated