Tom51 Posted July 3, 2018 Share Posted July 3, 2018 the most confusing damn thing I find is that Radius stuff on track. aristo craft uses ft for diameter and lgb uses radius, for instance I am using aristo switches with 10 ft diameter. I cannot figure out what that transfers in l terms of feet vs radius. to using LGB and PIKO track. R5 Seems to come out to about 8 ft diameter. I would like to find out how one figures this stuff out. I am not very good with numbers, so I am going to say if I want 10 ft diameter for switches do I go to like R 7 in LGB< PIKO? Quote Link to comment Share on other sites More sharing options...
Rayman4449 Posted July 3, 2018 Share Posted July 3, 2018 Not sure if you saw this topic, but see this thread I posted that outlines differences between Piko and LGB in Radius and Diameter this might help: Also as reference, Diameter=Radius x 2 (So a curve that is listed as 5ft radius is the same as 10ft diameter) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.