Screwy Nick Posted September 4, 2018 Share Posted September 4, 2018 I found what I think is a very good color match for the 28T Shay Smoke Box. My handrail stanchions loosened on the first couple of runs. I did a very poor job of reattaching them and messed up the paint. Found this at the auto store. Silver soldered them. Only the smoke box has been painted, the stack and front are still factory color. Seems to match the 2 cylinder Shay's also. LiG Quote Link to comment Share on other sites More sharing options...
Screwy Nick Posted September 9, 2018 Author Share Posted September 9, 2018 Was advised to add clear coat while the paint is still tacky to diminish some of the 'aluminum' look. Painted scraps of brass using Dupli Color Engine Enamel DE1650 (left) and the VHT with the clear as bille described (right). The smoke box is the first painting. The difference with or without the clear is very small, but enough to make a difference. The pic is taken with artificial light may look better in the sun light, raining today. This time I also did the stack and smoke box front so they can all age the same. Didn't use the DE1650 as it has a much lower temp threshold and I don't know how hot the smoke box actually gets.. LiG Quote Link to comment Share on other sites More sharing options...
Sean Posted September 9, 2018 Share Posted September 9, 2018 Quote Link to comment Share on other sites More sharing options...
Screwy Nick Posted September 13, 2018 Author Share Posted September 13, 2018 Now finished: The first two cures this paint requires were done in the oven. After re-assembling the last cure was while actually steaming on rollers. Pics with artificial light again, another cloudy day. I added a new (for me) experience today. Being a bit hearing impaired sometimes use an auto stethoscope to hear the gas flow. Today I held it to several areas of the engine and was able to hear the internal workings, and maybe what one of the 1:1' sound like. Also while waiting for paint to dry and cure I added a veneer of wood to the upper bunker. The only other enhancement I have done to his loco is added a NiCr screen to the burner. Oh yea, I swapped the gearing with a 2 cylinder shay to compare the running. Very happy with the look and running of this loco. Life is Good Quote Link to comment Share on other sites More sharing options...
Sean Posted September 14, 2018 Share Posted September 14, 2018 That came out great Nick! Quote Link to comment Share on other sites More sharing options...
PAZGRR7315 Posted September 23, 2018 Share Posted September 23, 2018 Nice article and work project... Quote Link to comment Share on other sites More sharing options...
Screwy Nick Posted September 24, 2018 Author Share Posted September 24, 2018 Thanks guys. since I now have the time I like to try and compare different things, maybe help others decide. Life is Good Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.