Jump to content

LGB 51950 signal use for switch


jln319
 Share

Recommended Posts

Hi, new to forum posting but have lurked for a while. I tried to use a 51950 signal to signal when the switch switches. I ran a jumper from the switch motor to the signal so it would activate when the switch did. I get power for the signal from the track. The power is from Massoth central station. The signal is working but the light doesn’t change. If I wave a magnet around the bottom of the signal the light changes. I changed the reed switch thinking it was bad but no change. Any ideas? Thanks!

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
  • Create New...