Kevin Strong Posted November 29, 2012 Share Posted November 29, 2012 Has anyone tried using an MTH automatic uncoupler with an Aristo Revolution? I had someone ask me about that at a show last weekend. I figured it could probably be done by using the Aristo smoke/light board to drive the solenoid that controls the coupler. Thoughts? Later, K Quote Link to comment Share on other sites More sharing options...
izzy0855 Posted November 28, 2013 Share Posted November 28, 2013 Kevin, On our New 10amp Throttle from RCS America, we will have a front and rear coupler output so you can remotely control from the RailLinx 900 latching from your locomotives couplers. Rick Isard Quote Link to comment Share on other sites More sharing options...
Jim Miller Posted November 29, 2013 Share Posted November 29, 2013 Phoenix is coming out with a auto coupler controller that will work with REVO...............Jim http://www.phoenixsound.com/ Quote Link to comment Share on other sites More sharing options...
izzy0855 Posted December 4, 2013 Share Posted December 4, 2013 Jim, John Weaver from Phoenix was over here at the shop last year (in 2012) looking at our new RailLinx RTSC (Remote Trackside Switch Control). We can remotely switch any device (Trackside Switches, Couplers, Ditch-Lights, etc...) without a servo or solenoid through the RailLinx 900 TX using code regulated voltage, and I think that's where John came up with the idea for their coupler board? But, I think there's has to use a solenoid or server? More power to him! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.