svergeylen Posted July 2, 2019 Share Posted July 2, 2019 Hello, I have a locomotive for track cleaning (LGB 2067) that should work with the integrated Lenz Decoder 55020... It is unfortunately not moving at all... :-( How can I diagnose the issue ? I have already : I opened the case, dismantle the decoder and power the motor with 5V : the locomotive is moving : not a mechanical problem The cleaning motor is working as well (internal button inside to switch it on/off) I am able to connect to the decoder with the Massoth Service Tool (MST) and set the adress, but I can't make it move on the tracks... I am able to measure 0 or 22V when hitting "Function 01" on my digital controller --> The address and the decoder seem to work ! I do not measure anything at the output of the decoder when playing with the controller --> always 0V at decoder output (engine) I am thinking about an issue in the decoder configuration... so I did write 55 at CV 55... but I am not sure it worked (?) I am thinking also at an issue at the power side between decoder output and engine (transitor ?) How can I diagnose the issue ? Model : https://duckduckgo.com/?q=lgb+2067&t=canonical&ia=images&iax=imageshttps://duckduckgo.com/?q=lgb+2067&t=canonical&ia=images&iax=images Documentation : https://www.onlytrains.com/model/railroad/MAN.html (look for "2067" ) Documentation decoder : www.champex-linden.de/download_lgb_bedienungsanleitungen/55020.pdf Thank you ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.