| |
-
Oh, I thought it might be some small super batteries that I didn't know about, but that makes sense now, good idea. Bob.
-
Hey Joe, what are the purple things? Bob.
-
I am glad that I finally found the edit button, as I make quite a few mistakes. I think that I will stick to passenger cars. Bob.
-
I didn't think that I saw those three dots either, because I looked I think you're right, oh well, they are there now. Bob.
-
I just clicked on the three dots on the right of the page and the drop down menu has an edit button, problem solved. I just tested it and it worked. Bob.
-
The one at the top, default pro red.
-
What happened to the edit button?
-
What happened to the edit button? So Sean, thank you.
-
Sounds like a good idea, and also here is a group, I believe on Yahoo groups. I joined this group and have been getting posts from them with some good info. I haven't posted anything yet because I don't yet have the MD5000 printer yet that needs repair, so I wouldn't know what to ask yet. Here is something that I discovered reading the factory user manual of an MD1300 printer. No where in the manual does it address the "overlay" button. This allows one to stop the page to print another layer of different spot colors in the exact position of the picture. It is almost like they are keeping the most valuable tool to be used a secret. I had to discover this procedure on Youtube. My question is, what other secretes are to be discovered?
Yahoo https://alps.groups.io/
-
What members out there uses the Alps md1000, md1300, md5000, md5500 printers? Maybe some ideas and procedures, even if you don't own one, can be shared for other users. Please post if you have one of these printers, or even if you don't, and just want to know more about them. I always like to learn. Bob.
-
Yes, I miss him. I bought several decals from him and they were perfect and I had no idea that he used this printer. Bob.
-
Yes, i kept hearing how great these Alps printers were, but until I, by trial and error kept trying to figure it out did I have success. I now agree, for decals these printers are the best. The best trick that this printer has is to be able to register the paper exactly in the proper place to overlay the next layer of color or clear. I just bought an Alps MD 5000, but it needs repair, so I will have to fix it, I will let you know how that comes out. I talked to one of the people in Japan that sells these refurbished printers and he said that the best one is the MD 1300 because it has fewer problems that any of the others. Bob.
-
I finally learned how to use my Alps printer. I am going to attempt to get these decals on the locos without wrinkles. The last picture was a test to see if the decal was not transparent and it is not, so it worked. I layered the colors, white, then one spot yellow, then, two layers of the regular color yellow and then a pass with the clear cover print and the color came out opaque not see through as some of my experiments did. Bob.
-
Thanks, next is the paint if I can find the correct Tuscan Red. Bob.
-
I keep finding parts to install. Bob.
-
The mounts for the door, lights, cockpit have been mounted. Also the diaphrams have been fitted. This is plus for building in 1:32, even parts from other manufacturers fit. The door fits perfectly. Bob.
-
Dive in there Joe, the 3d printer's price is down. Just learn to draw in 3d and you've got it. Bob.
-
I have changed my mind about using the MTH cab. I removed the cab and replaced it with the Rich Garich cab as it looks more accurate than the MTH cab. I will have to construct the MTH mounts within the cab for mounting the MTH stuff. Bob.
-
All of the hard stuff is done, now just painting and final assembly is necessary. Won't be long. Bob.
-
Some of you may know this about the center axle of the 3 axle NWSL block. The center axle does not have bushings between the case and the wheel as the outside axles have. The center one is allowed to float for tighter radii. Well sometimes the pickup bearing will float outside the case and cause the axle to tilt. It will not right itself, so the only way to correct this is to disassemble the block and re install this bearing. The white tabs that you see, were glued on the bearing to prevent the bearing from slipping outside of the case. The axles are still allowed to track back and forth without dislodging.
-
Here is where I installed the speed sensor. Bob.
-
The TIU., and in the A unit will be the MTH decoder and battery. Bob.
-
The reason that I used an F3 cab is that is has all of the proper mounts for the lights, cab interior light and the engineer and controls mount. In the B unit, I used a roof vent from the F3 also to allow the sound to escape from the B unit. Bob.
-
The reason is, I like the sounds and control that the DCS system offers, plus that is all that I use, except for the smaller phone control. It doesn't have all of the controls that the full system has. What decoder that you have used that has the sound quality that the DCS system has? Bob.
-
Fitting the mth electronics in the B unit and hope that it clears the trucks, looks like it will. Bob.
|
|
.png.a4fb2273837361b3bbaa7a1d8a4c8996.png){kind=logo}
