rmrobert6867@gmail.com Posted August 6, 2021 Share Posted August 6, 2021 I'm new to G Scale Railroading. Building a small layout. Want to use split jaw rail joiners. How do you remove LGB brass track (indoor section) rail joiners??? They have that bent-over tang thingy and a dimple. Ron R Quote Link to comment Share on other sites More sharing options...
Chuck Posted August 8, 2021 Share Posted August 8, 2021 Hi and welcome! Best way I've found is to destroy them. Spread them apart with a big flat screwdriver then using a pair of sturdy needle nose pliers pry the end down to where they sort of rotate out of the tie. Good luck! Quote Link to comment Share on other sites More sharing options...
BrianUPheritage Posted August 8, 2021 Share Posted August 8, 2021 USA Track is the same way I think. I unscrew the ties from the rail and then used a flathead screwdriver as Chuck said. Brian Quote Link to comment Share on other sites More sharing options...
rmrobert6867@gmail.com Posted August 9, 2021 Author Share Posted August 9, 2021 Yep, that works -- they must be destroyed (carefully) to remove. Certainly makes the track components "used" forever, ha! Very time consuming when you have lots of 'em. THANKS, Ron R Quote Link to comment Share on other sites More sharing options...
.png.a4fb2273837361b3bbaa7a1d8a4c8996.png){kind=logo}
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.