nscaler711 Posted December 11, 2017 Share Posted December 11, 2017 To be honest I don't really know where I am going with this... All I know is I "need" this plow... http://www.rrpicturearchives.net/showPicture.aspx?id=2316627 So... I don't posses the skills or technology to design and print it... Also I'll be more than happy to do more research on the plow. Can someone help me out on this please? Quote Link to comment Share on other sites More sharing options...
enginear joe Posted December 11, 2017 Share Posted December 11, 2017 As far as I know.... Back in the days that the engine shown was built, there were steps on the front and back of the engines for the people to stand on and hop off of to connect trains when switching. These became illegal I believe because of accidents where people got there feet amputated, broken, or severely injured. It's interesting that the engine has a homemade plate connecting these old steps. Maybe that mod was enough to get around the illegal steps without removing them? Makes for an interesting scratch build anyways. Quote Link to comment Share on other sites More sharing options...
DualRailTrail Posted December 11, 2017 Share Posted December 11, 2017 Hello, I could help you with printing a plow. I looked at the link you posted and I would just need a some dimensions and how you want to attach it to the locomotive. Rayman4449 notified me of your post as he’s planning to do a DCS install in a project I’m building. Quote Link to comment Share on other sites More sharing options...
enginear joe Posted December 11, 2017 Share Posted December 11, 2017 That looks great! Seems like a very high res print job. What model is it? Almost like this one Quote Link to comment Share on other sites More sharing options...
nscaler711 Posted December 11, 2017 Author Share Posted December 11, 2017 2 hours ago, DualRailTrail said: Hello, I could help you with printing a plow. I looked at the link you posted and I would just need a some dimensions and how you want to attach it to the locomotive. Rayman4449 notified me of your post as he’s planning to do a DCS install in a project I’m building. I don't really know how I would get dimensions for it to be honest, its kind of hard for me going off of photos and no one seems to have dimensions online either. It was produced in HO, by Details West. https://ppw-aline.com/collections/details-west-parts-locomotives-freight-cars-track-yards/products/dw-pl-130-plow-pilot-2nd-gen-hood-units-ea I have been trying to kitbash one and have failed several times. Probably doesn't help I am trying to use the steps that came with the GP38-2. Quote Link to comment Share on other sites More sharing options...
DualRailTrail Posted December 11, 2017 Share Posted December 11, 2017 26 minutes ago, enginear joe said: That looks great! Seems like a very high res print job. What model is it? Almost like this one Thanks Joe! it’s an sd70ace. I figured I was gonna get asked for more pics so I posted a new thread in kitbashing about it so not to hijack this thread. Quote Link to comment Share on other sites More sharing options...
DualRailTrail Posted December 11, 2017 Share Posted December 11, 2017 10 minutes ago, nscaler711 said: I don't really know how I would get dimensions for it to be honest, its kind of hard for me going off of photos and no one seems to have dimensions online either. I think it was produced in HO, but I can't figure out who made it. I have been trying to kitbash one and have failed several times. Probably doesn't help I am trying to use the steps that came with the GP38-2. Ok just to clarify, your looking for just this section? Is this going onto a USA Trains gp 38-2? Quote Link to comment Share on other sites More sharing options...
nscaler711 Posted December 11, 2017 Author Share Posted December 11, 2017 Yes thats all I need for right now. That is until I can figure out what is on the cab of these units as well. That and a K5LA24 or RS5T horn... Which don't exist in G. I'll never complain about the lack of parts in N scale again... (...to a point anyway. ) Quote Link to comment Share on other sites More sharing options...
DualRailTrail Posted December 12, 2017 Share Posted December 12, 2017 2 hours ago, nscaler711 said: Yes thats all I need for right now. That is until I can figure out what is on the cab of these units as well. That and a K5LA24 or RS5T horn... Which don't exist in G. I'll never complain about the lack of parts in N scale again... (...to a point anyway. ) I’ll get something made up by the end of the week and post it up here to see if you like. How do you want to attach it? Quote Link to comment Share on other sites More sharing options...
nscaler711 Posted December 12, 2017 Author Share Posted December 12, 2017 Ok awesome! I'm still trying to figure that one out myself... If it's solid I can use the existing holes on the pilot and drill and tap holes for a 2-56 screw. Or just glue it using Tenax 7r if the type plastic can handle it... Quote Link to comment Share on other sites More sharing options...
DualRailTrail Posted December 13, 2017 Share Posted December 13, 2017 Here’s what I came up with from the picture. There’s one with a cut out to go around a Kadee, and one without. I used double sided tape to attach this one to my GP and decided not to put holes for mounting so it’s not engine specific. Made of abs and printed at .15mm layer. $20 shipped for 1 or 30 for 2. Quote Link to comment Share on other sites More sharing options...
nscaler711 Posted December 13, 2017 Author Share Posted December 13, 2017 58 minutes ago, DualRailTrail said: Here’s what I came up with from the picture. There’s one with a cut out to go around a Kadee, and one without. I used double sided tape to attach this one to my GP and decided not to put holes for mounting so it’s not engine specific. Made of abs and printed at .15mm layer. $20 shipped for 1 or 30 for 2. You are amazing! I'll probably need two just in case. I'll pm you for payment details. Is there anything that I'd have to do to prep it for paint besides sand it? Quote Link to comment Share on other sites More sharing options...
DualRailTrail Posted December 13, 2017 Share Posted December 13, 2017 Cool, I’m glad you like it. Yes just email me, it’s in my profile. Let me know which style you want. No special prep needed. Acetone will melt the abs plastic so just use alcohol to degrease before paint and enjoy. Great idea for a cool accent. Post a pic when you get it finished. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.