Chuck Posted January 10, 2015 Share Posted January 10, 2015 I hope they make UP #844 as they already have most of it made. The pedestal tender along with cab & running gear mold work is done. Same with the front & rear locomotive trucks. All they need is the boiler and Bingo!! Then maybe they should make the auxiliary UP style water tenders as those can go behind 844, Challengers & Big Boys. Re-run the UP passenger cars with maybe a new dome & baggage car Quote Link to comment Share on other sites More sharing options...
enginear joe Posted January 10, 2015 Author Share Posted January 10, 2015 Hmmm, maybe this would be next? http://mthtrains.com/content/20-3532-1 sure hope they dive back in soon!! Quote Link to comment Share on other sites More sharing options...
Jerry B44 Posted January 10, 2015 Share Posted January 10, 2015 I made one in 1/29, using an Aristo Pacific as a base. Added an axle and Box pox? wheels. My centipede tender never would track will, but can use my Big Boy tender, fits the size pretty well and looks good with my 844. Quote Link to comment Share on other sites More sharing options...
du-bousquetaire Posted March 27, 2015 Share Posted March 27, 2015 I was wondering if the skyline cassing on the daylight can be removed on the MTH model as it comes very close in proportins to the RF&P 4-8-4 that are such beauty queens, especially the ones with the Hitchins tenders and I would like to try to kitbash this. The main problem is that the drivers although same size are not the correct kind for the RF&P ones. Making it near impossible although the two designs seem to be derived from one another. Nice job on that UP FEF Jerry. Aster is coming out with one soon, but at what price? Quote Link to comment Share on other sites More sharing options...
Rayman4449 Posted March 27, 2015 Share Posted March 27, 2015 Good looking engine Jerry. Simon, on the skyline cassing on the MTH GS4/2, no it can't be removed it's all built in as part of the boiler. Quote Link to comment Share on other sites More sharing options...
du-bousquetaire Posted April 2, 2015 Share Posted April 2, 2015 Thanks Raymond: I figured from the close up photos I had seen that it was cast integral with the rest of the boiler, but I wasn't sure. It would be a difficult kit bash never the less because of the drivers. Besides I like most of my steamers to be live steam. It's OK for diesels and electrics to be electrically driven, but I prefer live steam for steam locos. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.